Our Blog

Troubleshooting Guide for Your Westinghouse Refrigerator

Keeping your Westinghouse refrigerator running smoothly is essential for preserving your food and beverages. Like any appliance, it can experience issues affecting its performance. Here are eight common problems and troubleshooting tips to help you get your device back on track.

  1. Dirty Condenser Coils
    Dirty condenser coils can significantly reduce your appliance’s efficiency. Located at the back or bottom of the unit, these coils dissipate heat. Dust and debris can accumulate over time, causing the gadget to work harder to cool down. Unplug the device and gently clean the coils with a vacuum cleaner or a coil brush to fix this.
  2. Malfunctioning Evaporator Fan Motor
    The evaporator fan motor circulates air through the freezer and fridge compartments, ensuring even cooling. If your appliance is not cooling properly or you hear a loud noise, the evaporator fan motor could be the issue. Inspect the motor for ice buildup or obstructions and replace it if necessary.
  3. Broken Start Relay
    The start relay helps start the compressor, which is crucial for cooling. If your kitchen gadget isn’t cooling and you hear a clicking sound, the start relay might be broken. Unplug and test the relay with a multimeter for continuity. If it’s faulty, replace it.
  4. Malfunctioning Thermostat
    A malfunctioning thermostat can prevent your appliance from maintaining the correct temperature. Check the thermostat by turning it to the lowest and highest settings. If the compressor doesn’t turn on or off accordingly, the thermostat might be defective and needs replacement.
  5. Faulty Capacitor
    The capacitor helps start the compressor. If it’s not working, the compressor won’t run, leading to a warm fridge. Use a multimeter to test the capacitor for continuity. If it’s faulty, replace it to restore the cooling capability.
  6. Temperature Control Board Issues
    The temperature control board regulates the temperature inside. If it malfunctions, your device may not cool properly. Inspect the board for any signs of damage or burn marks. Replacing a faulty control board usually resolves the cooling issue.
  7. Malfunctioning Condenser Fan Motor
    It cools the condenser coils by circulating air over them. If the motor malfunctions, the appliance might overheat and cool poorly. To troubleshoot, check if the fan blades turn freely and listen for unusual noises. If the fan isn’t working correctly, it may need to be replaced.
  8. Defective Thermistor
    It monitors the temperature and sends the reading to the control board. A defective thermistor can cause inaccurate temperature regulation. Test the thermistor with a multimeter; if it’s not within the specified range, replace it.

Regular maintenance and prompt troubleshooting can keep your refrigerator running efficiently. If you’re unsure about handling these repairs, consider contacting Onefservice for professional assistance. Our expert technicians are ready to help you with all your appliance repair needs.